
When it comes to fermenting vegetables, there is one golden rule: keep everything submerged under the brine! Once you master this, you can confidently make vibrant, tangy, probiotic-rich ferments, whether that’s sauerkraut, kimchi, or your own creative veggie blends. Keeping your vegetables under the brine is the cornerstone of fermentation success. So, let’s learn all about fermentation weights.
Why submersion matters: the science
Lactic acid bacteria (LAB), the good microbes that thrive in oxygen-free (anaerobic) environments, power fermentation. At first, they can tolerate a bit of oxygen, but they quickly switch to anaerobic fermentation once oxygen levels drop. That’s when they start converting vegetable sugars into lactic acid.
Lactic acid does three things:
- Preserves your vegetables
- Creates that signature tangy flavour
- Lowers the pH below 4.6, keeping harmful bacteria like Clostridium botulinum, Salmonella, and E. coli from growing
Any veggies that peek above the brine become an open invitation for unwanted guests, mostly moulds or Kahm yeast.
- Mould looks fuzzy (bluish, greenish, or greyish).
- Kahm yeast forms a thin, white film, harmless but gives off flavours, and a sign your ferment didn’t acidify enough.
The solution? Create a physical barrier that keeps your vegetables pressed under the brine for the whole fermentation process.
Just remember to leave a bit of headspace: 3 – 5 cm (1–2 inches) so the brine doesn’t overflow.
Understanding the traditional two-part system
For centuries, people have used a simple yet super-effective setup to keep ferments submerged: the follower-and-weight system. These two parts work together harmoniously:
1. The Follower
The follower acts like a blanket, it covers your ferment and keeps little bits from floating up into the air. It creates a nice, even surface for the weight to press on.
2. The Weight
The weight sits on top of the follower, pushing everything down and keeping your veggies submerged as bubbles form during fermentation. A good rule of thumb is your weight should roughly be about half the weight of your vegetables (so if you’re fermenting 2 kg of veggies, aim for a 1 kg weight).
Natural, no-cost follower options
Let’s begin with the simplest, most accessible options that require no special purchases, things you likely already have in your kitchen.
Cabbage leaves: the classic choice
Whole cabbage leaves remain the gold standard for followers, particularly when fermenting cabbage-based vegetables like sauerkraut. They’re:
- Naturally food-safe and compatible with ferments
- They’re free, simply save the outer leaves
- Perfectly shaped to conform to jar shapes
- They’re disposable (or edible), simply compost them when your ferment is ready
How to use them:
- Select 1-2 of the outermost, cleanest and intact leaves from your cabbage
- Rinse the leaves thoroughly
- Once your jar is packed with shredded vegetables and brine, fold or roll the cabbage leaf to fit just inside the jar opening
- Press it down firmly over the ferment surface and tuck the sides of the leaf downwards
- Choose a weight to place on top that will fit between the leaf and the jar lid, keeping the vegetables submerged under the brine
For large crocks, you may need to overlap several leaves to achieve complete coverage.
If you’re fermenting vegetables other than cabbage, you can use grape, redcurrant leaves or blackberry leaves, which are traditional in many cultures and contain tannins that help maintain crispness.

Other Vegetable Pieces
If you want to get creative, try using sturdy veggie pieces as edible followers. Here are a few ideas:
- Cabbage cores: slice into discs to fit your jar
- Thick onion or daikon slices
- Halved capsicums (bell peppers), cut side down
- Large radish, apple, or carrot discs
Just be sure the follower you choose matches or complements the vegetables in your ferment to create a harmonious flavour.
Creative Low-Tech Weight Solutions
Now let’s talk about weights, starting with easy, no-cost options.
Clean River Rocks and Stones
Natural stones represent perhaps the oldest fermentation weight known to humanity. They’re simple, natural, and effective.
Selecting the right stones:
- Choose smooth river rocks without sharp edges
- Avoid limestone, it reacts with acidic brine
- Select a size appropriate to your vessel
- Look for non-porous stones that won’t absorb liquid
Pro tip: test unknown rocks by soaking them in vinegar for several hours, and if they bubble or fizz, they’re reacting with acid and shouldn’t be used.
Preparing stones for use:
- Scrub thoroughly with hot water and dish soap
- Boil for 15-20 minutes to sterilise
- Allow to cool and dry completely
The Nested Jar Method
A smaller jar placed inside your fermentation jar creates an elegant, effective weight.
Best jar options:
- Small juice glasses or shot glasses
- Baby food jars
- Condiment jars
- Ramekins (my favourites)
To maximise weight: Fill the smaller jar with water (and seal the lid) before placing it in your ferment. Some fermenters add clean stones inside the small jar for additional heft.
Advantages:
- No plastic contact with your food
- Easy to clean and sanitise
- Glass and glazed ceramic are non-reactive and non-porous
- You probably already have what you need
Just remember to leave a bit of headspace: 3 – 5 cm (1–2 inches) so the brine doesn’t overflow.
Bamboo skewer method
This works best with shouldered jars, which keep the skewers in place.
Once you have your follower in place, simply cut bamboo skewers to the width of the jar and criss-cross over the follower just under the shoulder of the jar, beneath the brine.

The plate and weight method for large vessels
For fermenting in crocks or large, wide-mouth jars, the traditional approach uses a dinner plate or a glass pie plate:
- Pack your vegetables into a vessel
- Place a clean dinner plate (slightly smaller than the crock opening) directly on top of the vegetables
- Back it up with a vegetable shelf under the plate (optional)
- Weight the plate down with a jar (as described in the section above)
- Seal the vessel and apply a fermentation lock if you are using one
This method is simple, old-school, and it works beautifully.
DIY weight solutions using kitchen items
Pie weights in mesh bags
This clever solution creates a flexible, conforming weight that spreads pressure evenly across your ferment’s surface. Personally, I am not a fan of this method. There is a lot of cleaning involved post-ferment!
Materials needed:
- Food-safe ceramic pie weights (unglazed or properly glazed)
- Small mesh produce bag or reusable muslin tea bag
Assembly:
- Ensure pie weights are clean and dry
- Place enough pie weights in the mesh bag to liberally cover the top of the ferment
- Tie the bag closed
- Place on top of your follower
Alternatives
- Glass marbles (ensure they’re lead-free and uncoloured)
- Stainless steel whiskey stones
- Food-grade glass beads
Commercial glass and ceramic weight options
If you prefer something purpose-made, here’s what to know to help you make the best investment.
Glass weights
Purpose-designed glass fermentation weights are made from the same non-iridized soda-lime glass as canning jars, ensuring they’re lead-free and food-safe. Modern designs feature handles or finger grips for easy removal.
Advantages:
- Non-porous—won’t absorb odours or bacteria
- Transparent—monitor fermentation progress
- Dishwasher safe
- Won’t leach chemicals into acidic environments
- Durable when handled carefully
Considerations:
- Can break if dropped
- Some designs may not provide enough weight for very active ferments
- Typically designed for wide-mouth jars only
- Investment required (though they last indefinitely with care)
Glass fermentation weights keep vegetables submerged in brine during fermentation in mason jars, preventing spoilage and fitting various jar sizes
Ceramic and stoneware weights
Traditional ceramic fermentation weights offer a time-tested option with substantial heft.
What to look for:
- High-fired stoneware or porcelain
- Unglazed porcelain is non-porous and won’t absorb anything
- If glazed, ensure it’s a clear, untinted food-safe glaze with no crazing (fine cracks)
- Avoid coloured glazes, especially reds, oranges, and yellows, which may contain cadmium
- Never use earthenware or terracotta—they’re too porous
Traditional split-design weights: many handcrafted ceramic weights come in two semi-circle pieces, making them easier to insert into jars and allowing for better coverage of the ferment surface.
Care requirements: porous ceramic weights must be completely dried before storage to prevent mould growth between uses. Boil for 20 minutes to sanitise thoroughly.
Weight advantage: ceramic weights are typically heavier than glass, providing better pressure for active ferments.
Traditional crocks with fitted weights (the Rolls-Royce!)
If you find yourself fermenting regularly in larger batches, investing in a quality ceramic crock with properly fitted weights can dramatically improve your success rate.
Traditional fermentation crocks offer several advantages :
- Sloped sides naturally hold weights in place and make it nearly impossible for vegetables to escape around the edges.
- Water seals allow gases to escape while preventing oxygen, mould, yeast, insects, and other contaminants from entering, eliminating the need for daily “burping”.
- Large capacity accommodates seasonal fermentation projects and provides more stable fermentation environments.
- Purpose-built weights fit perfectly and provide optimal pressure distribution.

Cleaning and storing fermentation weights
Cleaning after each use
Glass weights:
- Hand wash with hot soapy water or run through dishwasher
- Rinse thoroughly
- Air dry completely before storing
Ceramic/stoneware weights:
- Hand wash with hot soapy water
- For porous weights: Boil for 20 minutes to sterilise
- Critical: Dry completely (24 hours air drying or in a low oven) before storing to prevent mould growth
- For particularly smelly ferments (hello, fish sauce in kimchi): Soak in 60:40 water: vinegar solution before washing
Stones and rocks:
- Scrub with hot soapy water
- Boil for 15-20 minutes
- Dry completely before storing
Mesh bags with pie weights:
- Remove pie weights and wash separately in soapy water
- Rinse thoroughly and dry completely (oven drying at 150-200°C (300-400°F) for 20 minutes works well)
- Wash the mesh bag and hang it to dry completely
Storage tips
- Store all weights in a clean, dry location
- Keep them separate from raw foods
- Allow complete drying before storage (moisture promotes mould)
- Dedicated fermentation equipment should be kept separate from other kitchen tools
Common challenges and solutions
Problem: your vegetables keep floating up
Solution: Your weight isn’t heavy enough. Try:
- Filling your nested jar with brine
- Using a heavier material (ceramic instead of glass)
- Combining methods (follower + weight + nested jar)
- Ensuring you’ve packed vegetables tightly to begin with
Problem: your brine overflows
Solution:
- You’ve packed the jar too full—leave more headspace next time
- Place jar on a plate or tray to catch overflow (this is normal in active fermentation)
- Reduce weight slightly if ferment is being forcefully pushed up
Problem: small bits escape from under the weight
Solution:
- Always use a follower (like a cabbage leaf) under your weight
- Make sure the follower fits snugly to the sides of your vessel
- Those escaped bits can be carefully removed and discarded
- Any vegetables that remain under the brine are safe to eat
Problem: mould growing on accidentally exposed veggies
Solution:
- Remove mouldy portions immediately
- Assess whether the ferment was properly submerged (if a small piece floated up, the rest may be fine)
- Use a follower next time to prevent small pieces from escaping
- Ensure adequate weight to maintain submersion
Different jar types in relation to weights
Wide-mouth jars
Advantages: Easier to pack, easier to add and remove weights, more weight options fit
Best weights: Any of the methods described work well, especially purpose-made glass or ceramic weights designed for wide-mouth jars
Regular-mouth shouldered jars
Advantages: The shoulder of the jar naturally helps trap vegetables below the brine
Best weights: Vegetable follower (eg, cabbage leaf) held in place by the jar shoulder
Large crocks
Traditional method: Plate weighted down with water-filled jars
Alternative: Large glass crock weights are now available and offer advantages over traditional porous ceramic weights
Some final recommendations for beginners to old hands
For absolute beginners: start with the cabbage leaf (or other vegetable) follower and weight method. There is nothing to buy, and it works beautifully for sauerkraut and most beginner vegetable ferments.
For regular fermenters: the nested jar method (small jar inside your fermentation jar) provides an elegant, reusable solution with no plastic contact.
For serious enthusiasts: if you are a regular fermenter, it is definitely worth investing in glass or properly fired ceramic weights as they offer convenience, durability, and peace of mind for years of fermentation.
For large batch fermentation the traditional plate-and-jar method remains very effective for large straight-sided vessels, or consider investing in a traditional crock with fitted weights.
Whatever method you choose, the principle remains constant: keep everything submerged under the brine, maintain proper salt levels, ferment at appropriate temperatures, and trust the process. The beneficial bacteria know what to do—your job is simply to create the right conditions for their success.
The philosophy of low-tech fermentation
As you begin your fermentation journey, remember that humans have been fermenting vegetables for thousands of years, long before specialised equipment existed. Our ancestors relied on what nature provided: leaves, stones, plates, and plenty of ingenuity.
Today’s abundance of fermentation gadgets can make the practice seem complicated or equipment-heavy. While these tools can offer convenience and consistency, they aren’t essential. A clean jar, salt, vegetables, and something heavy to keep everything submerged are truly all you need.
Start simply, you can use a cabbage leaf and a clean rock! Experience the magic of transformation as beneficial bacteria turn fresh vegetables into tangy, probiotic-rich foods. As your confidence grows, you can expand your toolkit, or you may discover that the simplest methods work so beautifully that you never feel the need to change.
Most importantly, just begin. Don’t let not having specialised gear keep you from enjoying the flavour, and health benefits of home fermentation. With an understanding of the basic principles and access to everyday materials, you can create spectacular fermented foods!
Easy recipes to get you started
Ready to begin your fermentation journey? Here are some of our most-loved recipes:
May your ferments be bubbly, your vegetables crispy, and your gut microbiome thriving!

Leave a Reply